Journal of Applied Materials Engineering

(ISSN: 2658-1744) Open Access Journal
Rss Feed:

Journal of Applied Materials Engineering (JAME) is no longer published on JAMS (MDPI publishing platform) as of 15.10.2021. Articles remain hosted at jame.jams.pub by courtesy of JAMS and upon agreement with the journal owner until the publications are transferred to a new website.

J. Appl. Mater. Eng. 2021, 60(2); doi: 10.35995/jame60020006

Selected Properties of High Entropy Alloys Based on the AlFeMnNbNiTi System

1 Łukasiewicz Research Network—Krakow Institute of Technology, ul. Zakopiańska 73, 30-418 Kraków, Poland
2 AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland; (K.C.); (P.A.); (K.M.)
* Corresponding author:
* Author to whom correspondence should be addressed.
Received: 3 Jul 2020 / Revised: 4 Feb 2021 / Accepted: 16 Feb 2021 / Published: 19 Feb 2021
View Full-text Download PDF (5121kb)

Abstract

The aim of this work was to study the impact of various fabrication methods used to prepare high entropy alloys based on the AlFeMnNbNiTi system. Chemical composition was customized to ensure a solid solution structure with precipitation of the Laves phase. The three manufactured alloys were prepared by melting, but with the use of various input materials and different furnaces in protective atmospheres. After the melting process, heat treatment was carried out. Structures of obtained materials were analyzed by means of a Scanning Electron Microscope (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS) mapping. Mechanical properties were represented by Vickers hardness. In this paper, impact of the use of low purity input materials is shown, as well as differences in structure resulting from the utilization of different melting furnaces.
Keywords: high entropy alloys; microstructure; hardness; SEM; EDS
OPEN ACCESS
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY-SA 3.0).
CITE
Chrzan, K.; Cichocki, K.; Adamczyk, P.; Muszka, K. Selected Properties of High Entropy Alloys Based on the AlFeMnNbNiTi System. J_Appl_Mater_Eng 2021, 60, 0.
Chrzan K, Cichocki K, Adamczyk P, Muszka K. Selected Properties of High Entropy Alloys Based on the AlFeMnNbNiTi System. Journal of Applied Materials Engineering. 2021; 60(2):0.
Chrzan, Konrad; Cichocki, Kamil; Adamczyk, Piotr; Muszka, Krzysztof. 2021. "Selected Properties of High Entropy Alloys Based on the AlFeMnNbNiTi System." J_Appl_Mater_Eng 60, no. 2: 0.
Not implemented
SHARE

Article Versions

Export Article

Journal Browser